Vintage-cellars Evolution 162 Bottle Wine Rack Manuel d'utilisateur télécharger pdf

Evolution (E1)

Assembly Instructions

Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501

Please feel free to contact us regarding the assembly of this product.

2. Attach E1’s to Corners and Middle of the First Panel - Lay

one panel down on its narrow edge on a clean soft surface such

as carpeting, blanket or towel, being careful not to scratch the

panel. Insert an E1-SCREW through the hole in one of the bottom

corners. Align the end of the E1-SCREW with the threads on the

end of an E1 and fully tighten, being careful to not over tighten as

this may damage the panel, the threads in the E1 or both. Repeat

this process for the other 3 corners and the middle row.

Tip: A cordless drill with a 4mm driver tip will save considerable

time during assembly. Be sure to use a low torque setting, typically

around #3, on your drill’s clutch, if so equipped, to prevent

damaging any components from overtightening.

1. Prepare the Panels - Remove the protective paper lm from

both sides of the panels. Acrylic can scratch relatively easily, so do

not use anything sharp such as a razor blade to remove the lm.

Tip: Start peeling the top edge of the lm with a ngernail and

slowly roll the lm over the outside of an empty cardboard tube

from the E1 bottle support rods.

Required tools: 4mm Hex Wrench (included)

Recommend cordless drill with variable torque

clutch (set to low setting, typically #3) with

4mm driver tip

Panel

E1-SCREW

E1-STUD

3. Attach E1’s to Remaining Holes in Panel – Carefully lift the

panel to stand on the unsecured ends of the E1’s, like a table. Align

the top of an E1 with a hole and pivot the rod into place and secure

with an E1-SCREW. Repeat this process for the remaining holes.

1 2

Résumé du contenu

Page 1 - Assembly Instructions

Evolution (E1) Assembly InstructionsWine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501Please fee

Page 2

4. Afx the Second Panel – Carefully lift and rotate the partially assembled unit to rest on the panel with the unsecured ends upright, like

Commentaires sur ces manuels

Pas de commentaire

Vintage-cellars Evolution 162 Bottle Wine Rack Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Vintage-cellars Evolution 162 Bottle Wine Rack. Vintage Cellars Evolution 162 Bottle Wine Rack User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Vintage-cellars Evolution 162 Bottle Wine Rack